International Journal
2023
[55] C. Lee, I. G. Jang, "Computationally Efficient Topology Optimization for the SynRMs Based on the Torque Curve Interpolation," Structural and Multidisciplinary Optimization, vol. 66, no. 172, 2023. (link)
[54] S. Yoon, A. Schiffer, I. G. Jang, S. Lee, C. Y. Yeun, T. -Y. Kim, "Solitary wave-based site-specific bone quality assessment: A numerical study of the proximal femur," International Journal of Non-Linear Mechanics, vol. 155, 2023. (link)
[53] G. Kim, H. Jin, M. Kim, K. Jang, I. G. Jang, "Loop-wise Route Representation and Its Optimization Formulation for Symmetric Traveling Salesman Problems," IEEE Transactions on Intelligent Transportation Systems, vol.24, no. 9, pp. 9490-9500, 2023. (link)
[52] C. Lee, I. G. Jang, "Topology Optimization of Synchronous Reluctance Motors Considering the Optimal Current Reference in the Field-weakening and Maximum-torque-per-voltage Regions," IEEE Transactions on Energy Conversion, vol. 38, no. 3, pp. 1950-1961, 2023. (link)
[51] C. Lee, I. G. Jang, "Topology Optimization of the IPMSMs Considering both the MTPA and FW Controls under the Current and Voltage Limitations," IEEE Transactions on Industrial Electronics, vol. 70, no. 8, pp. 8244-8253, 2023. (link)
2022
[50] S. Yoon, A. Schiffer, I. G. Jang, S. Lee, C. Y. Yeun, T. -Y. Kim, "Detection of defects in cellular solids using highly nonlinear solitary waves: a numerical study of the proximal femur," Biomechanics and Modeling in Mechanobiology, 2022. (link)
[49] G. Kim, S. Kim, I. G. Jang, "Loopwise Route Representation-Based Topology Optimization for the Shortest Path Problems," IEEE Access, vol. 10, pp. 128835-128846, 2022. (link)
[48] D. Kim, Y. Ji, J. Lee, J. Yoo, S. Min, I. G. Jang, "A MATLAB code of node-based topology optimization in 3D arbitrary domain for additive manufacturing," Structural and Multidisciplinary Optimization, vol. 65, no. 311, 2022. (link)
[47] C. Lee, I. G. Jang, "Multi-material Topology Optimization for the PMSMs under the Consideration of the MTPA Control," Structural and Multidisciplinary Optimization, vol. 65, no. 9, pp. 1-11, 2022. (link)
[46] B. J. Chun, I. G. Jang, "Framework of sampling the subject-specific static loads from the gait cycle of interindividual variation," Computer Methods and Programs in Biomedicine, vol. 225, 2022. (link)
[45] C. Lee, I. G. Jang, "Topology Optimization Framework for Simultaneously Determining the Optimal Structural Design and Current Phase Angle of the IPMSMs for the MTPA Control," IEEE Transactions on Industrial Electronics, vol. 70, no. 3, pp. 2866-2875, 2022. (link)
[44] J. Kim, J.J. Kim, I. G. Jang, "Integrated topology and shape optimization of the five-spoke steel wheel to improve the natural frequency," Structural and Multidisciplinary Optimization, vol. 65, no. 78, 2022. (link)
[43] C. Lee, J. Lee, I. G. Jang, "Topology Optimization for the Manufacturable and Structurally Safe Synchronous Reluctance Motors with Multiple Iron Webs and Bridges," IEEE Transactions on Industrial Electronics, vol. 70, no. 1, pp. 678-687, 2022. (link)
2021
[42] K. Choi, J. Byun, S. Lee, I. G. Jang, "Adaptive Equivalent Consumption Minimization Strategy (A-ECMS) for the HEVs With a Near-Optimal Equivalent Factor Considering Driving Conditions," IEEE Transactions on Vehicular Technology, vol. 71, no. 3, pp. 2538-2549, 2021. (link)
[41] J. H. Kim, K. Choi, I. G. Jang, "Model-Predictive-Control-Based Time-Optimal Trajectory Planning of the Distributed Actuation Mechanism Augmented by the Maximum Performance Evaluation," Applied Science, vol. 11, no. 16, pp. 7513-1-12, 2021. (link)
[40] Y. Joo, Y. Yu, I.G. Jang, "Unit module-based convergence acceleration for topology optimization using the spatiotemporal deep neural network," IEEE Access, vol. 9, pp. 149766-149779, 2021. (link)
[39] C. Lee, I. G. Jang, "Topology optimization of multiple-barrier synchronous reluctance motors with initial random hollow circles," Structural and Multidisciplinary Optimization, vol. 64, pp. 2213-2224, 2021. (link)
[38] J. H. Kim, Y. J. Shin, I. G. Jang, "Evaluating the Maximum Directional Kinematic Capability of a Redundant Manipulator Based on Allowable Velocity and Force," IEEE Access, vol. 9, pp. 88085-88097, 2021. (link)
[37] S. Yoon, A. Schiffer, I. G. Jang, S. Lee, T. -Y. Kim, "Predictions of the elastic modulus of trabecular bone in the femoral head and the intertrochanter: a solitary wave-based approach," Biomechanics and Modeling in Mechanobiology, vol. 20, pp.1733–1749, 2021. (link)
[36] C. Lee, J. Lee, I. G. Jang, "Shape optimization-based design investigation of the switched reluctance motors regarding the target torque and current limitation," Structural and Multidisciplinary Optimization, vol. 64, pp. 859-870, 2021. (link)
[35] B. J. Chun, I. G. Jang, "Determination of the representative static loads for cyclically repeated dynamic loads: a case study of bone remodeling simulation with gait loads," Computer Methods and Programs in Biomedicine, vol. 200, 2021. (link)
[34] J. Yoo, I. G. Jang, I. Lee, "Multi-resolution topology optimization using adaptive isosurface variable grouping (MTOP-aIVG) for enhanced computational efficiency," Structural and Multidisciplinary Optimization, vol. 63, no. 4, pp. 1743-1766, 2021. (link)
2020
[33] J. H. Kim, I. G. Jang, "Optimization-based Investigation of Bioinspired Variable Gearing of the Distributed Actuation Mechanism to Maximize Velocity and Force," IEEE Robotics and Automation Letters, vol. 5, no. 4, pp. 6326-6333, 2020. (link)
[32] S. Yoon, A. Schiffer, J. J. Kim, I. G. Jang, S. Lee, T. -Y. Kim, "Numerical predictions of the interaction between highly nonlinear solitary waves and the microstructure of trabecular bone in the femoral head," Journal of the Mechanical Behavior of Biomedical Materials, vol. 109, 2020. (link)
[31] S. B. Lee, M. Kim, I. G. Jang, "Determination of the Optimal Resonant Condition for Multi-receiver Wireless Power Transfer Systems Considering the Transfer Efficiency and Different Rated Powers with Altered Coupling Effects," IEEE Journal of Emerging and Selected Topics in Power Electronics, vol. 9, no. 2, pp.2384-2393, 2020. (link)
~ 2019
[30] S. B. Lee, I. G. Jang, "Coil Layout Optimization for Maximizing the Power Transfer Efficiency of Wireless Power Transfer Systems with Multiple Transmitter Coils," IEEE Journal of Emerging and Selected Topics in Power Electronics, vol. 8, no.3, pp. 2672-2681, 2019. (link)
[29] Y. Yu, T. Hur, J. Jung, I. G. Jang, "Deep learning for determining a near-optimal topological design without any iteration," Structural and Multidisciplinary Optimization, vol. 59, no.3, pp. 787-799, 2019. (link)
[28] Y. H. Lee, J. J. Kim, I. G. Jang, "Patient-specific phantomless estimation of bone mineral density and its effects on finite element analysis results: a feasibility study," Computational and Mathematical Methods in Medicine, vol. 2019, pp. 10, 2019. (link)
[27] J. J. Kim, J. Nam, I. G. Jang, "Computational study of estimating 3D trabecular bone microstructure for volume of interest from CT scan data," International Journal for Numerical Methods in Biomedical Engineering, vol. 34, no. 4, pp. 2950, 2018. (link)
[26] J. J. Kim, J. Nam, I. G. Jang, "Fully automated segmentation of a hip joint using the patient-specific optimal thresholding and watershed algorithm," Computer Methods and Programs in Biomedicine, vol. 154, no. 1, pp. 161-171, 2018. (link)
[25] S. B. Lee, I. G. Jang, "Layout Optimization of the Receiver Coils for Multi-transmitter Wireless Power Transfer Systems," IEEE Journal of Emerging and Selected Topics in Power Electronics, vol. 5, no. 3, pp. 1311-1321, 2017. (link)
[24] S. B. Lee, C. Lee, I. G. Jang, "Precise Determination of the Optimal Coil for Wireless Power Transfer Systems through Postprocessing in the Smooth Boundary Representation," IEEE Transactions on Magnetics, vol. 53, no. 6, pp. 228-231, 2017. (link)
[23] J. J. Kim, I. G. Jang, "Estimation of local bone loads for volumes of interest," Journal of Biomechanical Engineering, vol. 138, no. 7, pp. 071004-1-8, 2016. (link)
[22] J. J. Kim, I. G. Jang, "Image resolution enhancement for healthy weight-bearing bones based on topology optimization," Journal of Biomechanics, vol. 49, no. 13, pp. 3035-3040, 2016. (link)
[21] S. B. Lee, S. Ahn, I. G. Jang, "Simulation-based feasibility study on the wireless charging railway system with a ferriteless primary module," IEEE Transactions on Vehicular Technology, vol. 66, no. 2, pp. 1004-1010, 2016. (link)
[20] K. Jang, H. Kim, I. G. Jang, "Traffic Signal Optimization for Oversaturated Urban Networks: Queue Growth Equalization," IEEE Transactions on Intelligent Transportation Systems, vol. 16, no. 4, pp. 2121-2128, 2015. (link)
[19] Y. H. Lee, Y. Kim, J. J. Kim, I. G. Jang, "Homeostasis-based aging model for trabecular changes and its correlation with age-matched bone mineral densities and radiographs," European Journal of Radiology, vol. 84, no. 11, pp. 2261-2268, 2015. (link)
[18] S. B. Lee, S. Ahn, I. G. Jang, "Development of the Optimization Framework for Low-Power Wireless Power Transfer Systems," IEEE Transactions on Microwave Theory and Techniques, vol. 63, no. 3, pp. 813-820, 2015. (link)
[17] Y. -K. Kim, I. G. Jang, Y. Kim, K. -S. Kim, S. Kim, "Structural Optimization of a Novel 6-DOF Pose Sensor System for Enhancing Noise Robustness at a Long Distance," IEEE Transactions on Industrial Electronics, vol. 61, no. 10, pp. 5622-5631, 2014. (link)
[16] I. G. Jang, K. -S. Kim, B. M. Kwak, "Conceptual and basic designs of the Mobile Harbor crane based on topology and shape optimization," Structural and Multidisciplinary Optimization, vol. 50, no. 3, pp. 505-515, 2014. (link)
[15] Y. -K. Kim, I. G. Jang, K. -S. Kim, S. Kim, “Design improvement of the three-beam detector towards a precise long-range 6-degree of freedom motion sensor system," Review of Scientific Instruments, vol. 85, no. 015004, 2014. (link)
[14] E. H. Kim, Y. S. Jung, Y. Yu, S. Kwon, H. Ju, S. Kim, B. M. Kwak, I. G. Jang, K. -S. Kim, "An advanced cargo handling system operating at sea," International Journal of Control, Automation and Systems, vol. 12, pp. 852-860, 2014. (link)
[13] Y. Yu, I. G. Jang, B. M. Kwak, "Topology optimization for a frequency response and its application to a violin bridge," Structural and Multidisciplinary Optimization, vol. 48, pp. 627-636, 2013. (link)
[12] E. H. Kim, K. W. Kwak, Y. K. Kim, S. Kim, B. M. Kwak, I. G. Jang, "Auto-positioning of sliding planes based on virtual force," International Journal of Control, Automation and Systems, no. 11, pp, 798-804, 2013. (link)
[11] Y. -K. Kim, Y. Kim, Y. S. Jung, I. G. Jang, K. -S. Kim, S. Kim, B. M. Kwak, "Developing Accurate Long-Distance 6-DOF Motion Detection With One-Dimensional Laser Sensors: Three-Beam Detection System," IEEE Transactions on Industrial Electronics, vol. 60, no. 8, pp. 3386-3395, 2013. (link)
[10] I. G. Jang, Y. H. Sung, E. J. Yoo, and B. M. Kwak, “Pattern design of a non-pneumatic tyre for stiffness using topology optimization,” Engineering Optimization, vol. 273, no.2, pp. 119-131, 2012. (link)
[9] I. G. Jang, I. Y. Kim, “Computational study on the effect of loading alteration caused by disc degeneration on the trabecular architecture in human lumbar spine,” Journal of Biomechanics, vol. 43, no. 3, pp. 492-499, 2010. (link)
[8] I. G. Jang, I. Y. Kim, “Computational simulation of simultaneous cortical and trabecular bone change in human proximal femur during bone remodeling,” Journal of Biomechanics, vol. 43, no. 2, pp. 294-301, 2010. (link)
[7] Y. Yu, I. G. Jang, I. K. Kim, B. M. Kwak, “Nodal line optimization and its application to violin top plate design,” Journal of Sound and Vibration, vol. 329, no. 22, pp. 4785-4796, 2010. (link)
[6] I. G. Jang, I. Y. Kim, “Application of design space optimization to bone remodeling simulation of trabecular architecture in human proximal femur for higher computational efficiency,” Finite Elements in Analysis and Design, vol. 46, no. 4, pp. 311-319, 2010. (link)
[5] I. G. Jang, I. Y. Kim, “Computational simulation of trabecular adaptation progress in human proximal femur during growth,” Journal of Biomechanics, vol. 42, no. 5, pp. 573-580, 2009. (link)
[4] I. G. Jang, I. Y. Kim, B. M. Kwak, “Analogy of strain energy density based bone-remodeling algorithm and structural topology optimization,” Journal of Biomechanical Engineering, vol. 131, no. 1, pp. 011012-1-7, 2009. (link)
[3] I. G. Jang, I. Y. Kim, “Computational study of Wolff’s law with trabecular architecture in the human proximal femur using topology optimization,” Journal of Biomechanics, vol. 41, no. 11, pp. 2353-2361, 2008. (link)
[2] I. G. Jang, B. M. Kwak, “Design space optimization using design space adjustment and refinement,” Structural and Multidisciplinary Optimization, vol. 35, pp. 41-54, 2008. (link)
[1] I. G. Jang, B. M. Kwak, “Evolutionary topology optimization using design space adjustment based on fixed grid,” International Journal for Numerical Methods in Engineering, vol. 66, no. 11, pp. 1817-1840, 2006. (link)